| FS-1000 series vegetable oil press |
|
|
|
This vegetable oil press is designed for cold pressing of canola, sunflower and other oil seeds without any seed conditioning. Its simple, reliable and maintenance-free drive line makes possible continuous operation of the press all over year around. The worm shaft of the press is driven by a set of V-belt drive through a gear reduction transfer case. This press type is used as the final press in one of Hungary's most advanced vegetable oil plants in Sarkad.
We sell our vegetable oil presses, whether in a small capacity shop or an industrial-size plant, as part of the technological unit engineered for the intended purpose and needs of the operation, or integrated into an existing infrastructure. We can provide further information or advice regarding our vegetable oil presses in the knowledge of the purpose of the operation (intended use of output and side products) and details of the existing infrastructure.
Technical details
|
|||||||||||||||||||||||||||||
|
Technical data |
|
|
Width (mm) |
1900 |
|
Length (mm) |
3970 |
|
Height (mm) |
2360 |
|
Electric power supply (V) |
3x400 V / 50Hz |
|
Electric motor (KW) |
45 |
|
Press capacity - canola (kg / h) |
800 |
|
Gearbox oil |
VG 220 |
|
Gearbox oil requirement (l) |
30 |
|
Noise level (dB) |
max. 70 |
|
Weight (kg) |
9800 |
|
Presshead heating (min) |
not needed |
|
Cake dimensions - depends on screw press settings |
3,0-8,0 mm thick cake |
|
Input oily seed requirement |
min. 15 °C kernel temperature and 5-7% moisture content |
Need further information? Contact us!
